| E-HEAD
MODEL 441A
The E-Head is specifically designed for welding light wall
pipe. It is the answer for the fabricator or contractor that
must weld a wide size range, normally requiring the purchase
of multiple weld Heads. The E-Head can be used on any size
pipe from 25mm (1.0") to 356mm (14"), with the change of
only one mounting component and consistently produces welds
meeting the most stringent code quality standards. It is
ideal for applications with limited radial clearance.
The E-Head clamps on only one side of the joint, allowing
use for pipe-to-fitting welds. A mechanical arc length
control device compensates for out-of-round pipe. The
head-mounted wire feeder uses standard filler wire spools
and provides precise and positive wire feeding, not possible
with floor-mounted feeders.
Process:
GTAW
weld Head Type:
Open arc. Entire Head rotates around pipe. Mounts on pipe
using guide rings.
Pipe Size Range:
25mm - 356mm (1.0" - 14") OD
|
Functions: |
|
- |
Torch rotation |
|
- |
Filler wire feed |
|
- |
Mechanical arc gap control |
|
Features: |
|
- |
Water-cooled torch for high duty cycle
applications |
|
- |
Broad pipe size range capability |
|
- |
Low profile |
|
- |
Mechanical arc length control to
compensate for out-of-round pipe |
|
- |
Readily accessible control at rear of
weld head allows torch cross seam positioning during
welding |
Download E-Head PDF
English |
French |
