| T-HEAD
MODEL 419
The T weld Head is capable of reproducing the precise
motions of a skilled manual GTAW welder. It is specifically
designed for multipass pipe welding applications and larger
diameter/heavy wall applications requiring precise welding
process control. Used with Pipemaster Power Source Models,
this weld Head improves productivity by increasing duty
cycle, reducing repair rates and producing welds of
consistent quality.
The weld Head is mounted on the pipe by means of metal Guide
Rings which are available for all standard pipe sizes. The
weld Head mounts entirely on one side of the joint, allowing
use for pipe-to-fitting welds.
FLX-TrackŪ allows long linear seam welds on flat or curved
surfaces, such as tanks and vessels, as well as ID, OD, and
compound curvature welds to be made. The track flexes to
conform to different diameters, and uses either vacuum or
magnet attachment. Mounting the Head on an oversize Guide
Ring with adapter feet allows use on CrMo and other alloys
requiring preheat.
Process:
GTAW
weld Head Type:
Open arc. Entire Head rotates around pipe. Mounts on pipe
using guide rings.
Pipe Size Range:
168mm - 1520mm (6.0" - 60") OD
(Larger sizes available upon request)
|
Functions:
|
|
- |
Torch rotation |
|
- |
Filler wire feed |
|
- |
Electronic torch oscillation |
|
- |
Electronic arc gap (AVC) control |
|
|
Features: |
|
- |
Multipass welding of tubes and pipes in
all gravity positions |
|
- |
Broad pipe size range |
|
- |
Water cooled torch uses standard
expendables |
|
- |
Welds meet all code standards |
Download T-Head PDF
English |
French |
